Fits F250 and F350 4x4 only
Each kit (made in Canada and assembled in
the USA) contains two mini spring packs, two center bolts, two left side
specific u-bolts/nuts/washers and two right side specific
u-bolts/nuts/washers as well as full color instructions and detailed
alignment specs packed into a 7" x 7" x 14" box weighing 35
pounds
The kit allows fitting of up to 33"
tires without trimming or rubbing, with proper off set 34" can be
used (check to make sure as each wheel and tire manufacturer uses a
different tape measure) on the non-dually trucks
Increases ground clearance over
traditional bracket type lift kits even without the use of larger wheels
and tires for those interested in getting the most out of there truck for
recreational or construction use
Custom alignment specs are included to
make sure the truck drives straight. No track bar modifications required.
Ride is very slightly firmer than stock
Shop installation is recommended as this
is a big and heavy truck, normal floor jacks and jack stands will not
support the added weight of a diesel engine or dually 4wd truck
|
