2022-2024 Hyundai Santa Cruz – 1.5″ Front and 1″ Rear Lift kit WITH Shock Shaft Extensions #303026

Code: 303026

$811.93

In Stock

Description

This Kit Fits:

2022-2024 Hyundai Santa Cruz

**FWD/AWD and all trim levels**

So you just bought a new 2022-2024 Hyundai Santa Cruz….but it sits WAAAAAY TO LOW in the front and when you hook up your trailer or load your dirt bike on your hitch mount rack it sags….guess what, we have the solution, our  1.5ā€³ front and 1″ rear lift kit will fix all those problems!

This #303026 kit is the same kit Hyundai used on the Rebelle Rally Santa Cruz and is the kit we recommend to use with the self levelling shock and/or if you have the tow package or want some off road capability – the extra length provided by the longer shock shaft gives you room for more articulation – the ladies proved it racing the Santa Cruz 1500 miles offroad in the Rebelle Rally…it should work just fine on your trips to the cabin, the backwoods fly fishing spot or just taking you way up the dirt road to where the cell phone stops ringing and Mother Nature is the soundtrack of your day :-}

If you don’t have the time or the need to escape to Mother Natures playground, you can also use kit # 303025 as it comes with the same parts as this kit, it just does NOT have the self levelling shock shaft extensions…if you just want to LEVEL out your truck, use kit #303024 as it makes the Santa Cruz sit close to level without adding any rear lift)

This kit has been designed specifically for the Santa Cruz ā€¦now; we had everyone wanting more height, common questions were always “can I get 3ā€, “can I get 4ā€ā€¦ sorry, the answer is no…seriously, it’s a NO. 

Trust us, if we could have given a taller kit the blessing of a long warranty and hassle free life we would have :-}

We have been doing this for a long time (we built our first unibody lift in 2005) and while we would LOVE to make it a taller kit, we tried that already. Our original design for the Santa Cruz was a 2ā€ kit and it was just too much ā€“ we didnā€™t like the angles and how it drove, while some people would be fine with it, we design every part we make to keep your vehicle driving and operating like stock; and do our best to make sure parts do not wear out any faster than they would without our kit installed. 

This kit will increase your front ground clearance and keep that air dam and bumper out of the mud or sand on those trips to the cabin or the beach, and yes, when you ad a size or two taller tire you will get 2-3″ MORE ground clearance.

This kit has been tested with full boost, wheels sliding and basicallyā€¦well doing things you should never do to a new vehicleā€¦we DO NOT recommend beating on your vehicle, you will break parts :-}

This is a straightforward install, yes we do include some very important simple install tricks in the instructions ā€“ you just need to make sure to read the instructions, they are not campfire starter!

This 1.5ā€³ lift kit allows you to fit much more aggressive tires and wheels allowing your Santa Cruz to take the family and all your toys to where they need to go! 

***ALWAYS test fit wheels and tires AFTER lift install***

We have fit up to 265/60R18 tires on aftermarket wheels….make sure to send us pics so we can post them up and let people know what your choice was!

Note: Every wheel and tire company seems to use a different measuring tape, one companies 265/60R18 will be 30.5 inches tall and another may be 31.4″ tall yet they have the same size on the sidewall – we can’t possibly test ALL combinations of wheels and tires so please install the kit before ordering tires or use an exact combination you have seen fit before!

All of our kits are a direct bolt in and require no modifications to your vehicle. These kits retain the stock ride quality of your truck as we use as many OEM parts as possible – keeping your truck under warranty is important, which is why we designed each kit to work with Factory parts..

Every Truxxx lift kit is made in the using USA or Canadian Mill Certified Steel and laser cut to precision tolerances using OEM drawings. 

Every kit is welded using the latest US Made welders and triple checked to ensure proper fitment. 

Each kit contains front strut spacers and sway bar extensions – we include all the all the required hardware in 10.9 & 12.9 grade, we have detailed instructions and complete alignment specs. 

Recommended installation time is approx. 3 hours + alignment and 30.5ā€ tall tires are commonly used with a stock style offset wheel.

Additional information

Front Lift

Rear Lift

Drivetrain

,

Make

Vehicle Year

, ,

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.