This Kit Fits:
2022 Hyundai Santa Cruz
So you just bought a new 2022 Hyundai Santa Cruz….but it sits WAAAAAY TO LOW in the front and when you hook up your trailer or load your dirt bike on your hitch mount rack it sags….guess what, we have the solution, our 1.5″ front and 1″ rear lift kit will fix all those problems!
(if you have the tow package and/or want some off road capability – you can also use kit # 303026 as it comes with the self levelling shock shaft extensions…if you just want to LEVEL out your truck, use kit #303024 as it makes the Santa Cruz sit close to level without adding any rear lift)
This kit has been designed specifically for the Santa Cruz …now; we had everyone wanting more height, common questions were always “can I get 3”, “can I get 4”… sorry, the answer is no…seriously, it’s a NO.
Trust us, if we could have given a taller kit the blessing of a long warranty and hassle free life we would have :-}
We have been doing this for a long time (we built our first unibody lift in 2005) and while we would LOVE to make it a taller kit, we tried that already. Our original design for the Santa Cruz was a 2” kit and it was just too much – we didn’t like the angles and how it drove, while some people would be fine with it, we design every part we make to keep your vehicle driving and operating like stock; and do our best to make sure parts do not wear out any faster than they would without our kit installed.
This kit will increase your front ground clearance and keep that air dam and bumper out of the mud or sand on those trips to the cabin or the beach, and yes, when you add a size or two taller tire you will get 2-3″ MORE ground clearance.
This kit has been tested with full boost, wheels sliding and basically…well doing things you should never do to a new vehicle…we DO NOT recommend beating on your vehicle, you will break parts :-}
This is a straightforward install, yes we do include some very important simple install tricks in the instructions – you just need to make sure to read the instructions, they are not campfire starter!
There is NO cutting or welding or permanent modifications needed.
This 1.5″ lift kit allows you to fit much more aggressive tires and wheels allowing your Santa Cruz to take the family and all your toys to where they need to go!
***ALWAYS test fit wheels and tires AFTER lift install***
We have fit up to 265/60R18 tires on aftermarket wheels….make sure to send us pics so we can post them up and let people know what your choice was!
Note: Every wheel and tire company seems to use a different measuring tape, one companies 265/60R18 will be 30.5 inches tall and another may be 31.4″ tall yet they have the same size on the sidewall – we can’t possibly test ALL combinations of wheels and tires so please install the kit before ordering tires or use an exact combination you have seen fit before!
All of our kits are a direct bolt in and require no modifications to your vehicle. These kits retain the stock ride quality of your truck as we use as many OEM parts as possible – keeping your truck under warranty is important, which is why we designed each kit to work with Factory parts..
Every Truxxx lift kit is made in the using USA or Canadian Mill Certified Steel and laser cut to precision tolerances using OEM drawings.
Every kit is welded using the latest US Made welders and triple checked to ensure proper fitment.
Each kit contains front strut spacers and sway bar extensions – we include all the all the required hardware in 8.8 & 10.9 grade, we have detailed instructions and complete alignment specs.
Recommended installation time is approx. 3 hours + alignment and 30.5” tall tires are commonly used with a stock style offset wheel.