2023-2024 Kia Telluride X-Pro & X-Line 2.0″ Front Lift Kit and 2.0″ Rear Lift Kit with Shock Shaft Extensions #306020

Code: 306020

$811.93

In Stock

Description

This Kit Fits:
2023-2024 Kia Telluride EX X-Line

2023-2024 Kia Telluride SX X-Line

2023-2024 Kia Telluride SX Prestige X-Line

2023-2024 Kia Telluride SX X-PRO

2023-2024 Kia Telluride SX Prestige X-PRO

OK…so the X-Line/X-Pro have a different suspension and trim package, there is more approach angle and the setup is different from a “normal” Telluride….if you have the X-Line/X-Pro package this is the ONLY kit you can use…using one of our other Telluride kits will not fit.

If you are still not sure what package you have the X-Line/X-Pro has a special trim package or simply contact your dealer with your VIN # or when you order give us you VIN # and we can find out ( this may take 24 hours)

The Xline/Xpro comes with different approach angles, more ground clearance and an offroad package – we made this kit specifically for this trim package.

Now that we have the details out of the way, we are guessing that you just bought your shiny new Kia Telluride and after you have it loaded up and hit the road, you headed to that killer campground down at the lake or maybe you headed to some amazing place up in the mountains, all the gear was loaded, your roof tent is on, the cooler had a weekends worth of refreshments and “let the adventure begin soundtrack is playing” you are ready to flex that new Xline muscle and all is great until you leave the pavement….quickly, your realize your killer new SUV still sits WAAAAAY TO LOW in the front, way to low in the rear and your underbelly starts dragging….even worse, when you hook up your tiny camper trailer or load your mountain bike or snowboards on your hitch mount rack the back end of the SUV sags….and even with that killer new bumper style giving you more approach angle, you still need more! Bigger tires and a little more than the OEM 8.4″ of clearance would make your next adventure…well, perfect!

Well, we have the solution, we have been making Telluride lifts since Kia came out with it, and with the new Xline/Xpro our  2.0ā€³ front and 2.0″ rear lift kit will help fix all those dragging body parts…or just looking much cooler in the parking lot!

This kit has been designed specifically for the Telluride X-Line/X-Pro.

This kit is the one we created for the person living the life of adventures…or someone who wanted to be ready for the adventure when opportunity arises! This will allow you to create the perfect daily driver combination for the person who drives the vehicle daily to work and run errands, then hits the backroads on the weekends!

We have been selling this kit to Kia & Hyundai dealers around the world since it was released, this kit is designed to work WITH the stock parts that came on your vehicle, no need to modify any parts, we include everything you need to create the do anything Telluride/Palisade.

We have been doing this for a long time (we built our first unibody lift in 2005) and while we would LOVE to make it an even taller kit, we tried that already ~ our original design for the Telluride/Palisade was a 3″ kit and it was just too much ā€“ we didnā€™t like the angles and how it drove, while some people would be fine with it, we design every part we make to keep your vehicle driving and operating like stock; and do our best to make sure parts do not wear out any faster than they would without our kit installed. 

This kit will increase your front ground clearance and keep that air dam and bumper out of the mud or sand on those trips to the cabin or the beach, and yes, when you add a size or two taller tire you will get 2.0 -3.0″ MORE ground clearance.

This kit has been tested with full throttle, wheels sliding and basicallyā€¦well doing things you should never do to a new vehicleā€¦we DO NOT recommend beating on your vehicle, you will break parts :-}

This is a straightforward install, yes we do include some very important simple install tricks in the instructions ā€“ you just need to make sure to read the instructions, they are not campfire starter!

There is NO cutting or welding or permanent modifications needed. 

This  lift kit allows you to fit much more aggressive tires and wheels allowing your Telluride/Palisade to take the family and all your toys to where they need to go! 

***ALWAYS test fit wheels and tires AFTER lift install***

We have fit up to 265/60R18 tires on aftermarket wheels….make sure to send us pics so we can post them up and let people know what your choice was!

Note: Every wheel and tire company seems to use a different measuring tape, one companies 265/60R18 will be 30.5 inches tall and another may be 31.5″ tall yet they have the same size on the sidewall – we can’t possibly test ALL combinations of wheels and tires so please install the kit before ordering tires or use an exact combination you have seen fit before!

All of our kits are a direct bolt in and require no modifications to your vehicle. These kits retain the stock ride quality of your truck as we use as many OEM parts as possible – keeping your truck under warranty is important, which is why we designed each kit to work with Factory parts..

Every Truxxx lift kit is made in the using USA or Canadian Mill Certified Steel and laser cut to precision tolerances using OEM drawings. 

Every kit is welded using the latest US Made welders and triple checked to ensure proper fitment. 

Each kit contains front strut spacers and sway bar extensions – we include all the all the required hardware in 8.8 & 10.9 grade, we have detailed instructions and complete alignment specs. 

Recommended installation time is approx. 3 hours + alignment and 31.0ā€ tall tires are commonly used with a stock style offset wheel.

 

 

 

 

  

Additional information

Front Lift

Rear Lift

Drivetrain

Make

Vehicle Year

,

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.