2003-2025 Chevy Express Van Dual Rear Wheel ~ 2WD & 2003-2025 GMC Savanna Van Dual Rear Wheel ~ 2WD – 2.5″ Front & 2.5″ Rear Lift Kit #404089-B

2003–2026 Chevy Express / GMC Savana 3500/4500 DRW (Dual Rear Wheel) – 2.5″ Front / 2.5″ Rear Lift Kit (#404089-B)

The “Equalizer” | 100% American Steel | 2WD Dually Specialist

Stop Dragging Your Assets.

Let’s have some “Real Talk”: If you’re driving a Chevy Express or GMC Savana Dually, you aren’t headed to the grocery store—you’re hauling a mobile workshop, a shuttle bus, or enough equipment to start your own zip code. From the factory, these vans sit so low they practically graze the road, and the front end usually looks like it’s diving for loose change. Our 2.5″ All-Around Lift Kit is the professional fix to get that entire chassis off the pavement and give your rig the “truck” stance it should have had on day one.

🛑 THE “SAVER YOUR BRAINS” FITMENT NOTE: This kit is precision-engineered specifically for the Dual Rear Wheel (DRW) 3500 and 4500 chassis. It’s built for the 2WD workhorses that carry the heavy loads. From the 2003 legends to the brand-new 2026 models, if it’s got dualies in the back and 2WD in the front, this is your kit.

The Highlights:

• The “Full Lift” Stance: We aren’t just leveling the front; we’re boosting the whole rig. With 2.5″ in the front and 2.5″ in the rear, you get maximum ground clearance for steep job site ramps, high curbs, and those “van-eating” potholes that usually wreck your front air dam.

• Keep the Payload, Gain the Height: We know you bought a Dually because you carry weight. Our heavy-duty rear blocks and 5/8″ U-bolts are designed to work with your factory 1-ton leaf springs, not against them. You keep your hauling capacity; you just do it 2.5 inches higher.

• Professional Ride Quality: We’ve been perfecting van lifts since 2003. This kit is designed to stay within the happy window of your factory suspension geometry. Your drivers get a better view of traffic, and the van keeps the stable, predictable handling a 10,000lb+ vehicle needs.

• 100% American Steel: When you’re lifting a vehicle that weighs as much as a small apartment, you don’t use plastic or “budget” alloys. Every spacer in this kit is laser-cut from US Mill Certified Steel. It’s overbuilt because we know “good enough” is how jobs get delayed.

• Direct Bolt-On: No “making it fit,” no cutting, and no welding. This is a straightforward, bolt-on installation. We designed it to minimize shop time because if the van is on the hoist, it isn’t making you money.

Technical Specifications:

What’s in the Box?

• (2) Heavy-Duty Front Coil Spacers

• (2) Precision-Fabricated Rear Lift Blocks

• (4) High-Strength 5/8″ U-Bolts (Sized for DRW Axles)

• All required Grade 10.9/12.9 mounting hardware

• Detailed instructions that actually make sense