2003-2008 Dodge Ram 2500, 3500, Dually 4WD – 2″ Front Leveling Kit #605020-B

Code: 605020-B

$246.93

In Stock

Description

This Kit Fits all engines, models and trim levels of:

2003-2008 Dodge Ram 2500 4×4

2003-2008 Dodge Ram 3500 4×4

2003-2008 Dodge Ram 3500 Dually 4×4

This is a 2″ ALL STEEL ( yes 100% real steel, not rubber or plastic or wood like some other kits on the market) lift for all versions of the 2003-2008 Dodge Ram 2500, 2003-2008 Dodge Ram 3500 4×4 & 2003-2008 Dodge Ram 3500 Dually 4×4 pickups.

Yessir, it fits them all.

If you have a Mega Cab or a Regular Cab, a 5.7 or the 6.7 Cummins…maybe you have the Quad Cab or the 5.9…whatever it is, this is the right kit for you.

If you have a straight axle, coil spring Dodge 4×4 with the shock inside the spring made before 2013, this is your kit….yes, it works on the 2500, the 3500, and the dually – it just has to be a 4×4 for all of these applications 

This Truxxx kit is easy to install and has NO CHANGE in OEM ride quality…seriously, the hardest part is remembering to turn the steering wheel to get the trac bar to line up when you are putting it back together (I fought with it for 20 minutes in 2004 when we designed this kit, then for some reason I turned the steering wheel and it all slid together…ya I know)

We designed our kit to use OEM springs (or any aftermarket spring that is an OEM replacement) because we like the way the Ram drives, we like it’s qualities as a daily driver and we like that all of the important steering and suspension parts are all designed to work with the OEM springs…whether you are using the stock replacement stuff or are doing the full upgrade, this kit is designed to work with those aftermarket and stock parts.

We found we needed more tire than stock to do what we wanted our truck to do…we wanted more ground clearance to fit those 35’s that make our work week and weekend adventures the best they can be….everyone likes to drive to work looking down on a electric car don’t they!

Ground clearance is increased over stock and allows for up to 35″ tall tires on an OEM offset style aftermarket rim.

All of our Ram leveling kits are a direct bolt in and we make them with USA and Canadian Mill Certified Steel and laser cut to precision tolerances using OEM drawings.

This kit works with all original equipment replacement shocks although we normally do upgrade to a Bilstein or KYB shock just because most of the stock stuff from when your truck was new would be well worn out by now!

Recommended installation time is approx 2 hours + alignment and a 35” tall tire is commonly used on a stock style offset wheel.

• Designed to retain the stock ride quality! • Aftermarket shocks are NOT required! • Alignment specs included! •

Additional information

Front Lift

Rear Lift

Drivetrain

Make

Vehicle Year

, , , , ,

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.