This Kit Fits:
2022-2023 Nissan Frontier 2wd & 4×4
2022-2023 Nissan Frontier PRO4X 4×4
So you love your new Nissan Frontier, so do we…we just thought it needed more tire and a much more leveled look!
We get it, we have a soft spot for Nissan’s…so we created a couple options we thought you might like, this one is our Truxxx 2″ front level kit…ok, before you order this kit – MAKE SURE TO MEASURE your truck, we have found some trucks that are 2″ down up front and others that are 1.75″ down up front, most are 2″ in our area so please measure YOUR OWN truck to be sure.
This kit works with with ALL 2022-2023 Nissan Frontier S, SV and Pro4x 4×4’s (this kit will also work with 2wd’s)
This 2” allows you the room to run bigger tires on either a stock or aftermarket rim.
Just as an FYI – if you are off-roading at all, at full droop and articulation the stock shocks and brake lines are not fully stretched but it is not designed for the wheels to be leaving the ground. If your off-roading consists of gravel roads, this isn’t such a big deal ( any of the rear kit sizes will work fine) but if the trip to your cabin or fishing hole means some creek crossings or ditch jumping, well we wanted to keep you informed!
We have fit 33.00″ tall tires ( 275/70R17) on high offset aftermarket wheels (some models of the stock rims will not be wide enough) but you should always test fit/purchase/order wheels and tires after the lift is installed..
Every wheel and tire company seems to use a different measuring tape, one companies 275/70R17 will be 33.10 inches tall and another may be 32.4″ tall yet they have the same size on the sidewall – we can’t possibly test ALL combinations of wheels and tires so please install the kit before ordering tires or use an exact combination you have seen fit before!
All of our kits are a direct bolt in and require no modifications to your vehicle. These kits retain the stock ride quality of your truck as we use as many OEM parts as possible – keeping your truck under warranty is important, which is why we designed each kit to work with Nissan Factory parts..
Every Truxxx 2” lift kit is made in the using USA or Canadian Mill Certified Steel and laser cut to precision tolerances using OEM drawings.
Every kit is welded using the latest US Made welders and triple checked to ensure proper fitment.
Each kit contains front strut spacers and we include all the all the required hardware in 8.8 & 10.9 grade, we have detailed instructions and complete alignment specs.
Recommended installation time is approx. 3 hours + alignment and 33” tall tires are commonly used on 4×4’s with a stock style offset wheel.