This Kit Fits:
2001-2007 Toyota Sequoia 2wd/4wd
The Truxxx 901010 lift kit raises your Toyota Sequoia 3” in the front and 1.5” in the rear. This kit enhances the ride of your SUV as well as increasing the ground clearance and providing room for larger wheel and tires. The Truxxx 901010 kit is unique in that it uses a steel spacer to preload the spring ( the ride is approx 10% stiffer) to get the correct amount of free sag or down travel in combination with both front strut mount spacers and rear coil spring spacers.This increase in front preload drastically improves the drivability in both on and off road conditions and improves handling in all weather!.
We also include a diff drop, a mandatory piece of any Toyota lift. A diff drop keeps your CV joints from locking up and from binding causing premature wear. We use 8.8 and 12.9 graded hardware and we ONLY use North American steel for our spacers, not aluminum. Steel withstands harsh offroad conditions, doesn’t wear down with use and is consistent with the life of the vehicle. By using quality parts you get long life and your differential, transmission and axles are as happy as when your truck rolled off the assembly line. Every Truxxx 901010 lift kit is Made in the USA with USA Mill Certified Steel and laser cut to precision tolerances using OEM drawings. Each kit is welded using the latest US Made welders and triple checked to ensure proper fitment. We powder coat every part in-house to make sure the finish lasts as long as your truck does! Each kit contains two front strut spacers, two front strut plates, two rear spring spacers plus all hardware needed, detailed instructions and complete alignment specs. Recommended installation time is approx 3 hours + alignment and a 33” tall tires are commonly used on ‘0’ offset aftermarket style wheel.
• Designed to retain the stock ride quality! • Aftermarket shocks are NOT required! • Alignment specs included! •